Jockstrap harnesses

These jockstrap harnesses are SO hot that I barely know what else to say about them! I have several of my own now, and believe me I wear them a LOT, both in and out of the bedroom! 

They look fantastic on their own (leaving your fun-bits exposed and accessible!) but also look sexy as hell when worn over underwear (e.g. briefs, hot-pants or a thong), so they make for TRULY fabulous club-wear too!

Basically, if you like harnesses etc (whether for fashion or kink-play or both) you absolutely want one of these!

The sizing for these is a bit more detailed than for my other products, so please make sure you read the sizing information below. They are very adjustable, I just want to make sure you’ll be able to make it fit you perfectly. 

Custom sizing is also available at no extra charge. Just follow the instructions on both “How to measure” images, and then enter your measurements instead of your sizes.

*******************************

Important note (just to reiterate): 

This jockstrap harnesses is made of straps. It will NOT cover your genitals. If you want your genitals to be covered you will need to wear it with something that does!

*******************************

SIZING INFO

1 

You’ll notice I ask for two sizes: your WAISTBAND size, and your CROTCH > BUTT > THIGH size (which refers to the strap that wraps around your leg). This is because people’s proportions vary a lot around this area and I want to ensure everyone a great fit. For example your waistband size might be an “S” and your crotch-butt-thigh might be an “M”, and I want to be able to construct your jockstrap accordingly. 

I’ve included a sizing chart in the images, and instructions for taking the relevant measurements. If you want to enter your measurements rather than a size, that’s fine too.

2

These jockstraps are very adjustable, so there is some overlap in the measurements each size can accommodate (for example: my waistband measurement is 101cm, which could be accommodated by waistband size M, LM, or L; and my crotch-butt-thigh measurement is 75cm, which could be accommodated by crotch-butt-thigh size LM, L, or XL). To give you maximum adjustability, I recommend going with the sizes where your measurement falls closest to the middle of that size’s range (so in my own case I go with a waistband size LM, and a crotch-butt-thigh size L).

If you decide to go with measurements rather than a size, your jockstrap will still be adjustable: it will be constructed so that *your specific* measurements are the middle of its adjustability range.

MATERIALS INFO

The strap is made from industrial polypropylene webbing, with a decorative cotton herringbone strip, and lined with a reinforced rip-stop fabric.

The hardware is mostly steel (see below for details) and comes with either a black finish or a nickel (i.e. silvery) finish.

Hardware details:

The rivets, eyelets and D-ring are steel.

My supplier doesn’t have detailed info on what the buckles are made from, but I’ve run some tests and I’m fairly sure they’re die-cast zinc. The prong of the buckle is steel (which is normal for zinc-cast buckles).

The black finish is applied via powder-coating* and the nickel finish via standard electroplating. Both finishes are applied industrially by the manufacturer.

*Note: “Powder-coating” takes its name from the process used and does NOT mean the coating is actually powdery! Look it up if you’re curious, but trust me the finish is tough and durable! Most metal you see around that looks painted is done using this process.